Juki Gathering Foot
Product variants
Choose from several options below and add to your order.
Description of the Juki Gathering Foot
Juki Gathering Foot
The Juki gathering foot is suitable for gathering light fabrics
The fabric is transported unevenly during sewing and thus acquires its characteristic gathering. With the special notch in the gathering foot, the pleated material can be sewn directly to a smooth piece of fabric in one go. To do this, the smooth material is pushed into the notch and not gathered.
How it works
1. Set the Juki sewing machine for straight stitch with the needle in the far left position if possible.
2. Place the fabric to be gathered under the presser foot with the raw edge slightly protruding on the right side of the presser foot.
place the fabric not to be gathered all the way into the groove of the foot.
place the fabric pieces right sides together.
3. Guide the fabric and make sure that the Juki sewing machine can pull the bottom fabric layer freely for even gatheringChanging
the stitch length changes the degree of gathering. A single fabric layer can also be gathered by placing it under the foot and adjusting the stitch length and tension to the degree of gathering
Brand: universal |
For Juki |
HZL 27Z |
HZL 53E, 57E |
HZL 60H, 80H |
HZL G110, G120, G210, G220 |
HZL F300, F400, F600 |
HZL DX3, DX5, DX7 |
HZL NX7 |
Productspecifications Juki Gathering Foot
Suitable for
Suitible for the following machines
- HZL 27Z
- HZL 353
- HZL 53E
- HZL 57E
- HZL 60H
- HZL 80H
- HZL DX3
- HZL DX5
- HZL DX7
- HZL F300
- HZL F400
- HZL F600
- HZL G110
- HZL G120
- HZL G210
- HZL G220
- HZL NX7