Price incl. VAT
Out of stock
Safe Order & pay
Pay immediately, afterwards or spread out
More than 35 years of experience
Own workshop
Rated with a 9.5
Product information
Description
Juki Mo-1000 threader
1. Loosen the set screws (A) and (B).
2. Adjust the lateral position of the hook by moving the base (C) to the right and left. Move the operating lever downward until the threading position is reached.
Adjust the lateral position of the base (C) by turning the hook assy. (D) so that the hook enters the eye of the right needle. Then secure the base by tightening screw (A).
At this time, secure the threading shaft so that it is parallel to the needle bar. (It is acceptable to check the parallelism visually.)
3. Adjust the vertical position of the hook assy. (D) by moving it in the axial direction. Move the hook to the position where the lower end of the hook does not interfere with the lower end of the needle eye, and secure the hook in that position with screw (B).
The amount by which the hook protrudes from the needle eye is 1.8 mm. After adjustment, lift the operating lever. At this time, check that the hook does not interfere with the presser bar and the needle.
Find your machine
Suitable for
Your search returned no results.