Juki Blind Zipper Foot

In stock
calendar
Ordered today, shipped today
engineering
dark-check-circle Veilig bestellen & betalen
dark-check-circle Betaal direct, achteraf of gespreid
dark-check-circle Meer dan 35 jaar ervaring
dark-check-circle Eigen Werkplaats

Product variants

Choose from several options below and add to your order.

In stock
10.00
In stock
8.50
In stock
18.50
In stock
35.00
In stock
17.00
In stock
9.00

Description of the Juki Blind Zipper Foot

Juki Blind Zipper Foot

A Juki blind zipper is a practical solution for inconspicuous closures.

The zipper has this name for a reason: it is concealed in the seam so that it is no longer visible. This
is an excellent solution for elegant garments made of precious fabrics, such as evening gowns, but also for skirts and blouses. Blind zippers (also called invisible zippers) can be easily inserted with the Juki Blind Zipper Foot.

How to insert the juki blind zippers

  1. At the zipper split (the opening in the fabric where the zipper is to be inserted), mark the length of the zipper on the right side of the fabric with the fabric pen at both split edges. The zipper should be at least 2 to 3 cm longer than the final zipper slit.
  2. Snap on the special blind zipper foot and select straight stitch, the needle should be in the center position. Choose stitch length 2.5 to 3.0 mm.
  3. Open the zipper and use your thumb to slightly unfold the teeth of the zipper until the place for the seam between the zipper tape and the teeth become visible. Attention: never iron the zipper!
  4. Place the right part of the zipper, right sides together, on the right edge of the zipper split. The teeth of the zipper should be exactly above the seam line, the zipper ends at the top about 1.5 to 2 cm below the top edge of the fabric, if necessary pin in place. Make sure that the zipper extends 2 to 3 cm at the bottom of the split.
  5. Carefully press the teeth of the zipper slightly to the right and place the presser foot on the zipper so that the teeth are to the right of the needle at the notch of the foot.
  6. Sew the zipper in place from top to bottom and tie off. Now close the zipper.
  7. Place the other side of the zipper with its top edge on the right side of the left edge of the split. Make sure that the teeth of the right and left side start at the same height.
  8. Open the zipper again.
  9. Now carefully press the teeth of the zipper a little to the left and place the presser foot on the zipper so that the teeth are positioned at the notch to the left of the needle.
  10. Stitch the zipper in place from top to bottom and tie off. Close the zipper.
  11. Now sew up the seam under the zipper slit. Start at the bottom of the seam! To sew the seam closed, insert the regular zipper foot. The right side of the zipper foot and the presser foot holder should be exactly under each other. Move the needle to the right position.
  12. Place the loose bottom of the zipper toward the seam and sew the seam closed as far as the last stitch of the zipper split.
  13. Press the seam open.
Brand: universal
For Juki
HZL 27Z
HZL 53E, 57E
HZL 60H, 80H
HZL G110, G120, G210, G220
HZL F300, F400, F600
HZL DX3, DX5, DX7
HZL NX7

Productspecifications Juki Blind Zipper Foot
Merk Juki
Product Sewing machine feet
Made by Universeel
Model voet Blinde ritsvoet

Suitable for

Suitible for the following machines
Juki
  • HZL 27Z
  • HZL 353
  • HZL 53E
  • HZL 57E
  • HZL 60H
  • HZL 80H
  • HZL DX3
  • HZL DX5
  • HZL DX7
  • HZL F300
  • HZL F400
  • HZL F600
  • HZL G110
  • HZL G120
  • HZL G210
  • HZL G220
  • HZL NX7