Price incl. VAT
In stock
Safe Order & pay
Pay immediately, afterwards or spread out
More than 35 years of experience
Own workshop
Rated with a 9.5
Product information
Description
The original Husqvarna pleating device is a specialist for easily gathering and pleating fabrics. Thanks to the variable adjustment options, both the pleat depth and the frequency of the pleats can be varied. The pleating device can therefore, as desired, make a pleat at every 6th or 12th stitch. There is also the option of sewing no pleats without changing the presser foot (ruffler setting = 0). The pleat is created with the help of the special gathering plate. As the needle moves up and down, a little fabric is taken along each time and pushed under the needle. The result: beautiful and even pleats on home accessories or garments. The pleat depth can be easily adjusted by turning the adjusting screw
Setting the pleating device
1. Remove the presser foot holder.
2. Replace the needle clamp screw with the longer screw that belongs to the pleating device.
3. Place the pleating device on the presser foot bar of the machine with the fork above the needle clamp screw. Screw the device onto the presser foot bar with the supplied wing nut.
4. Set the machine to a straight stitch.
5. Lower the presser foot pressure if necessary.
6. The adjusting lever ( J) controls how often the pleating device should pleat. Setting to 1 means one pleat at every stitch, 6 one pleat at every sixth stitch or 12 one pleat at every twelfth stitch. Setting to 0 means no pleats, the pleating device does not work; a regular straight stitch is active.
7. With the adjusting screw (I), the depth of the pleats can be set. Try this first on remnants of the fabric to be gathered. Turn the screw to the right for more and to the left for less fabric in the pleat.
8. Stitch length 2.5–3. Also try other stitch lengths because the stitch length also determines the depth of the pleat. The shorter the stitch, the shorter the distance between the pleats. The width must always be 0 for straight stitch.
Sewing
1. Place the fabric to be pleated in the guide slot (G), then between the two black plates of the pleating device (E&F) behind the needle point
.2. Lower the presser foot and sew evenly.
Making pleats and stitching them in place at the same time on smooth fabric
1. Place the smooth fabric with the right side up, under the pleating device.
2. Place the fabric to be pleated with the right side down, in the guide slot and between the plates as described above (1).
3. Start sewing. The feed dog moves the smooth fabric when the upper fabric is pleated and sewn onto it.
Choose your colour
Product variants
Choose from several options below and add to your order. Different colours count together towards the volume discount.
Find your machine
Suitable for
Your search returned no results.
See the machine in action
