Bernina Overlock Foot 2
Product variants
Choose from several options below and add to your order.
Description of the Bernina Overlock Foot 2
The Bernina Overlock Foot 2 is ideal for fabricating overlock seams and hems.
It is ideally suited for finishing simple seams.
The stitches are formed over the connection piece on the inside and therefore contain an extra amount of thread. This prevents the fabric from contracting.
A flat and elastic seam is created. You can also sew high-quality hems, cuff and cord seams on knit fabric with the overlock foot.
Use the practical Overlock foot 2 for your sewing and get neat, elastic seams or fashionable cuff seams easily and quickly.
Procedure
Select the overlock stitch or a suitable elastic stitch.
> Set the stitch width to 4 - 5.
> Set the stitch length to 1 - 1.5.
> Set the needle position as desired. While doing so, make sure the needle does not land on the
sole of the presser foot.
> Set the feed teeth to sew.
> Place the fabric edges under the foot so that the sole of the presser foot lies exactly
on the edge.
> Overlock seam: On the right side, the needle should always insert into the empty space close to the right of
the sole so that a sufficient amount of thread
is created and the edge does not contract.
> Finishing seams: Use the zigzag or the overlock stitch.
Tip
> For stretch fabrics, lower the presser foot pressure.
> Use the jersey/embroidery needle.
Productspecifications Bernina Overlock Foot 2
Suitable for
Suitible for the following machines
- Activa 125
- Activa 130
- Activa 135
- Activa 140
- Activa 145
- Activa 210
- Activa 215
- Activa 220
- Activa 230
- Activa 240
- Artista 165
- Artista 170
- Artista 630
- Aurora 430
- Aurora 440 QE
- B 325
- B 330
- B 335
- B 350
- B 380
- B 435
- B 475
- B 530
- B 535
- B 550 QE
- B 570 QE (voor 2017)
- B 720
- B 735
- Virtuosa 150
- Virtuosa 153
- Virtuosa 155
- Virtuosa 160
- Virtuosa 163